/* * Copyright © 2001-2010 Stéphane Raimbault * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU Lesser Public License as published by * the Free Software Foundation; either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Lesser Public License for more details. * * You should have received a copy of the GNU Lesser Public License * along with this program. If not, see . */ /* The library is designed to send and receive data from a device that communicate via the Modbus protocol. The function names used are inspired by the Modicon Modbus Protocol Reference Guide which can be obtained from Schneider at www.schneiderautomation.com. Documentation: http://www.easysw.com/~mike/serial/serial.html http://copyleft.free.fr/wordpress/index.php/libmodbus/ */ #include #include #include #ifdef HAVE_INTTYPES_H #include #endif #ifdef HAVE_STDINT_H #include #endif #include #include #include #include #include #include #include /* TCP */ #include #include #include #if defined(__FreeBSD__ ) && __FreeBSD__ < 5 #include #endif #include #include #include #include #if !defined(UINT16_MAX) #define UINT16_MAX 0xFFFF #endif #include #include "modbus.h" /* Exported version */ const unsigned int libmodbus_version_major = LIBMODBUS_VERSION_MAJOR; const unsigned int libmodbus_version_minor = LIBMODBUS_VERSION_MINOR; const unsigned int libmodbus_version_micro = LIBMODBUS_VERSION_MICRO; /* This structure reduces the number of params in functions and so * optimizes the speed of execution (~ 37%). */ typedef struct { int slave; int function; int t_id; } sft_t; /* Table of CRC values for high-order byte */ static uint8_t table_crc_hi[] = { 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41, 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 }; /* Table of CRC values for low-order byte */ static uint8_t table_crc_lo[] = { 0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2, 0xC6, 0x06, 0x07, 0xC7, 0x05, 0xC5, 0xC4, 0x04, 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E, 0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09, 0x08, 0xC8, 0xD8, 0x18, 0x19, 0xD9, 0x1B, 0xDB, 0xDA, 0x1A, 0x1E, 0xDE, 0xDF, 0x1F, 0xDD, 0x1D, 0x1C, 0xDC, 0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6, 0xD2, 0x12, 0x13, 0xD3, 0x11, 0xD1, 0xD0, 0x10, 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32, 0x36, 0xF6, 0xF7, 0x37, 0xF5, 0x35, 0x34, 0xF4, 0x3C, 0xFC, 0xFD, 0x3D, 0xFF, 0x3F, 0x3E, 0xFE, 0xFA, 0x3A, 0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38, 0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA, 0xEE, 0x2E, 0x2F, 0xEF, 0x2D, 0xED, 0xEC, 0x2C, 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26, 0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0, 0xA0, 0x60, 0x61, 0xA1, 0x63, 0xA3, 0xA2, 0x62, 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4, 0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F, 0x6E, 0xAE, 0xAA, 0x6A, 0x6B, 0xAB, 0x69, 0xA9, 0xA8, 0x68, 0x78, 0xB8, 0xB9, 0x79, 0xBB, 0x7B, 0x7A, 0xBA, 0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C, 0xB4, 0x74, 0x75, 0xB5, 0x77, 0xB7, 0xB6, 0x76, 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0, 0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92, 0x96, 0x56, 0x57, 0x97, 0x55, 0x95, 0x94, 0x54, 0x9C, 0x5C, 0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E, 0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98, 0x88, 0x48, 0x49, 0x89, 0x4B, 0x8B, 0x8A, 0x4A, 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C, 0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86, 0x82, 0x42, 0x43, 0x83, 0x41, 0x81, 0x80, 0x40 }; static const int TAB_HEADER_LENGTH[2] = { HEADER_LENGTH_RTU, HEADER_LENGTH_TCP }; static const int TAB_CHECKSUM_LENGTH[2] = { CHECKSUM_LENGTH_RTU, CHECKSUM_LENGTH_TCP }; static const int TAB_MAX_ADU_LENGTH[2] = { MAX_ADU_LENGTH_RTU, MAX_ADU_LENGTH_TCP, }; const char *modbus_strerror(int errnum) { switch (errnum) { case EMBXILFUN: return "Illegal function"; case EMBXILADD: return "Illegal data address"; case EMBXILVAL: return "Illegal data value"; case EMBXSFAIL: return "Slave device or server failure"; case EMBXACK: return "Acknowledge"; case EMBXSBUSY: return "Slave device or server is busy"; case EMBXNACK: return "Negative acknowledge"; case EMBXMEMPAR: return "Memory parity error"; case EMBXGPATH: return "Gateway path unavailable"; case EMBXGTAR: return "Target device failed to respond"; case EMBBADCRC: return "Invalid CRC"; case EMBBADDATA: return "Invalid data"; case EMBBADEXC: return "Invalid exception code"; case EMBMDATA: return "Too many data"; default: return strerror(errnum); } } static void error_print(modbus_param_t *mb_param, const char *context) { if (mb_param->debug) { fprintf(stderr, "ERROR %s", modbus_strerror(errno)); if (context != NULL) { fprintf(stderr, ": %s\n", context); } else { fprintf(stderr, "\n"); } } } int modbus_flush(modbus_param_t *mb_param) { int rc; if (mb_param->type_com == RTU) { rc = tcflush(mb_param->fd, TCIOFLUSH); } else { do { /* Extract the garbage from the socket */ char devnull[MAX_ADU_LENGTH_TCP]; #if (!HAVE_DECL___CYGWIN__) rc = recv(mb_param->fd, devnull, MAX_ADU_LENGTH_TCP, MSG_DONTWAIT); #else /* On Cygwin, it's a bit more complicated to not wait */ fd_set rfds; struct timeval tv; tv.tv_sec = 0; tv.tv_usec = 0; FD_ZERO(&rfds); FD_SET(mb_param->fd, &rfds); rc = select(mb_param->fd+1, &rfds, NULL, NULL, &tv); if (rc == -1) { return -1; } rc = recv(mb_param->fd, devnull, MAX_ADU_LENGTH_TCP, 0); #endif if (mb_param->debug && rc != -1) { printf("\n%d bytes flushed\n", rc); } } while (rc > 0); } return rc; } /* Computes the length of the expected response */ static unsigned int compute_response_length(modbus_param_t *mb_param, uint8_t *query) { int length; int offset; offset = TAB_HEADER_LENGTH[mb_param->type_com]; switch (query[offset]) { case FC_READ_COIL_STATUS: case FC_READ_INPUT_STATUS: { /* Header + nb values (code from force_multiple_coils) */ int nb = (query[offset + 3] << 8) | query[offset + 4]; length = 2 + (nb / 8) + ((nb % 8) ? 1 : 0); } break; case FC_READ_HOLDING_REGISTERS: case FC_READ_INPUT_REGISTERS: /* Header + 2 * nb values */ length = 2 + 2 * (query[offset + 3] << 8 | query[offset + 4]); break; case FC_READ_EXCEPTION_STATUS: length = 3; break; case FC_REPORT_SLAVE_ID: /* The response is device specific (the header provides the length) */ return MSG_LENGTH_UNDEFINED; default: length = 5; } return length + offset + TAB_CHECKSUM_LENGTH[mb_param->type_com]; } /* Builds a RTU query header */ static int build_query_basis_rtu(int slave, int function, int start_addr, int nb, uint8_t *query) { query[0] = slave; query[1] = function; query[2] = start_addr >> 8; query[3] = start_addr & 0x00ff; query[4] = nb >> 8; query[5] = nb & 0x00ff; return PRESET_QUERY_LENGTH_RTU; } /* Builds a TCP query header */ static int build_query_basis_tcp(int slave, int function, int start_addr, int nb, uint8_t *query) { /* Extract from MODBUS Messaging on TCP/IP Implementation Guide V1.0b (page 23/46): The transaction identifier is used to associate the future response with the request. So, at a time, on a TCP connection, this identifier must be unique. */ static uint16_t t_id = 0; /* Transaction ID */ if (t_id < UINT16_MAX) t_id++; else t_id = 0; query[0] = t_id >> 8; query[1] = t_id & 0x00ff; /* Protocol Modbus */ query[2] = 0; query[3] = 0; /* Length will be defined later by set_query_length_tcp at offsets 4 and 5 */ query[6] = slave; query[7] = function; query[8] = start_addr >> 8; query[9] = start_addr & 0x00ff; query[10] = nb >> 8; query[11] = nb & 0x00ff; return PRESET_QUERY_LENGTH_TCP; } static int build_query_basis(modbus_param_t *mb_param, int slave, int function, int start_addr, int nb, uint8_t *query) { if (mb_param->type_com == RTU) return build_query_basis_rtu(slave, function, start_addr, nb, query); else return build_query_basis_tcp(slave, function, start_addr, nb, query); } /* Builds a RTU response header */ static int build_response_basis_rtu(sft_t *sft, uint8_t *response) { response[0] = sft->slave; response[1] = sft->function; return PRESET_RESPONSE_LENGTH_RTU; } /* Builds a TCP response header */ static int build_response_basis_tcp(sft_t *sft, uint8_t *response) { /* Extract from MODBUS Messaging on TCP/IP Implementation Guide V1.0b (page 23/46): The transaction identifier is used to associate the future response with the request. */ response[0] = sft->t_id >> 8; response[1] = sft->t_id & 0x00ff; /* Protocol Modbus */ response[2] = 0; response[3] = 0; /* Length will be set later by modbus_send (4 and 5) */ response[6] = 0xFF; response[7] = sft->function; return PRESET_RESPONSE_LENGTH_TCP; } static int build_response_basis(modbus_param_t *mb_param, sft_t *sft, uint8_t *response) { if (mb_param->type_com == RTU) return build_response_basis_rtu(sft, response); else return build_response_basis_tcp(sft, response); } /* Fast CRC */ static uint16_t crc16(uint8_t *buffer, uint16_t buffer_length) { uint8_t crc_hi = 0xFF; /* high CRC byte initialized */ uint8_t crc_lo = 0xFF; /* low CRC byte initialized */ unsigned int i; /* will index into CRC lookup */ /* pass through message buffer */ while (buffer_length--) { i = crc_hi ^ *buffer++; /* calculate the CRC */ crc_hi = crc_lo ^ table_crc_hi[i]; crc_lo = table_crc_lo[i]; } return (crc_hi << 8 | crc_lo); } /* The check_crc16 function shall return the message length if the CRC is valid. Otherwise it shall return -1 and set errno to EMBADCRC. */ static int check_crc16(modbus_param_t *mb_param, uint8_t *msg, const int msg_length) { uint16_t crc_calculated; uint16_t crc_received; crc_calculated = crc16(msg, msg_length - 2); crc_received = (msg[msg_length - 2] << 8) | msg[msg_length - 1]; /* Check CRC of msg */ if (crc_calculated == crc_received) { return msg_length; } else { if (mb_param->debug) { fprintf(stderr, "ERROR CRC received %0X != CRC calculated %0X\n", crc_received, crc_calculated); } if (mb_param->error_recovery) { modbus_flush(mb_param); } errno = EMBBADCRC; return -1; } } /* Sends a query/response over a serial or a TCP communication */ static int modbus_send(modbus_param_t *mb_param, uint8_t *query, int query_length) { int rc; uint16_t s_crc; int i; if (mb_param->type_com == RTU) { s_crc = crc16(query, query_length); query[query_length++] = s_crc >> 8; query[query_length++] = s_crc & 0x00FF; } else { /* Substract the header length to the message length */ int mbap_length = query_length - 6; query[4] = mbap_length >> 8; query[5] = mbap_length & 0x00FF; } if (mb_param->debug) { for (i = 0; i < query_length; i++) printf("[%.2X]", query[i]); printf("\n"); } /* In recovery mode, the write command will be issued until to be successful! Disabled by default. */ do { if (mb_param->type_com == RTU) rc = write(mb_param->fd, query, query_length); else /* MSG_NOSIGNAL Requests not to send SIGPIPE on errors on stream oriented sockets when the other end breaks the connection. The EPIPE error is still returned. */ rc = send(mb_param->fd, query, query_length, MSG_NOSIGNAL); if (rc == -1) { error_print(mb_param, NULL); if (mb_param->error_recovery && (errno == EBADF || errno == ECONNRESET || errno == EPIPE)) { modbus_close(mb_param); modbus_connect(mb_param); } } } while (mb_param->error_recovery && rc == -1); if (rc > 0 && rc != query_length) { errno = EMBBADDATA; return -1; } return rc; } /* Computes the length of the header following the function code */ static uint8_t compute_query_length_header(int function) { int length; if (function <= FC_FORCE_SINGLE_COIL || function == FC_PRESET_SINGLE_REGISTER) /* Read and single write */ length = 4; else if (function == FC_FORCE_MULTIPLE_COILS || function == FC_PRESET_MULTIPLE_REGISTERS) /* Multiple write */ length = 5; else if (function == FC_REPORT_SLAVE_ID) length = 1; else length = 0; return length; } /* Computes the length of the data to write in the query */ static int compute_query_length_data(modbus_param_t *mb_param, uint8_t *msg) { int function = msg[TAB_HEADER_LENGTH[mb_param->type_com]]; int length; if (function == FC_FORCE_MULTIPLE_COILS || function == FC_PRESET_MULTIPLE_REGISTERS) length = msg[TAB_HEADER_LENGTH[mb_param->type_com] + 5]; else if (function == FC_REPORT_SLAVE_ID) length = msg[TAB_HEADER_LENGTH[mb_param->type_com] + 1]; else length = 0; length += TAB_CHECKSUM_LENGTH[mb_param->type_com]; return length; } #define WAIT_DATA() { \ while ((s_rc = select(mb_param->fd+1, &rfds, NULL, NULL, &tv)) == -1) { \ if (errno == EINTR) { \ if (mb_param->debug) { \ fprintf(stderr, \ "A non blocked signal was caught\n"); \ } \ /* Necessary after an error */ \ FD_ZERO(&rfds); \ FD_SET(mb_param->fd, &rfds); \ } else { \ error_print(mb_param, "select"); \ if (mb_param->error_recovery && (errno == EBADF)) { \ modbus_close(mb_param); \ modbus_connect(mb_param); \ errno = EBADF; \ return -1; \ } else { \ return -1; \ } \ } \ } \ \ if (s_rc == 0) { \ /* Timeout */ \ if (msg_length == (TAB_HEADER_LENGTH[mb_param->type_com] + 2 + \ TAB_CHECKSUM_LENGTH[mb_param->type_com])) { \ /* Optimization allowed because exception response is \ the smallest trame in modbus protocol (3) so always \ raise a timeout error. \ Temporary error before exception analyze. */ \ errno = EMBUNKEXC; \ } else { \ errno = ETIMEDOUT; \ error_print(mb_param, "select"); \ } \ return -1; \ } \ } /* Waits a reply from a modbus slave or a query from a modbus master. This function blocks if there is no replies (3 timeouts). The argument msg_length_computed must be set to MSG_LENGTH_UNDEFINED if undefined. The function shall return the number of received characters and the received message in an array of uint8_t if successful. Otherwise it shall return -1 and errno is set to one of the values defined below: - ECONNRESET - EMBBADDATA - EMBUNKEXC - ETIMEDOUT - read() or recv() error codes */ static int receive_msg(modbus_param_t *mb_param, int msg_length_computed, uint8_t *msg) { int s_rc; int read_rc; fd_set rfds; struct timeval tv; int length_to_read; uint8_t *p_msg; enum { FUNCTION, BYTE, COMPLETE }; int state; int msg_length = 0; if (mb_param->debug) { if (msg_length_computed == MSG_LENGTH_UNDEFINED) printf("Waiting for a message...\n"); else printf("Waiting for a message (%d bytes)...\n", msg_length_computed); } /* Add a file descriptor to the set */ FD_ZERO(&rfds); FD_SET(mb_param->fd, &rfds); if (msg_length_computed == MSG_LENGTH_UNDEFINED) { /* Wait for a message */ tv.tv_sec = 60; tv.tv_usec = 0; /* The message length is undefined (query receiving) so * we need to analyse the message step by step. * At the first step, we want to reach the function * code because all packets have that information. */ state = FUNCTION; msg_length_computed = TAB_HEADER_LENGTH[mb_param->type_com] + 1; } else { tv.tv_sec = mb_param->timeout_begin.tv_sec; tv.tv_usec = mb_param->timeout_begin.tv_usec; state = COMPLETE; } length_to_read = msg_length_computed; s_rc = 0; WAIT_DATA(); p_msg = msg; while (s_rc) { if (mb_param->type_com == RTU) read_rc = read(mb_param->fd, p_msg, length_to_read); else read_rc = recv(mb_param->fd, p_msg, length_to_read, 0); if (read_rc == 0) { errno = ECONNRESET; read_rc = -1; } if (read_rc == -1) { error_print(mb_param, "read"); if (mb_param->error_recovery && (errno == ECONNRESET || errno == ECONNREFUSED)) { modbus_close(mb_param); modbus_connect(mb_param); /* Could be removed by previous calls */ errno = ECONNRESET; return -1; } return -1; } /* Sums bytes received */ msg_length += read_rc; /* Display the hex code of each character received */ if (mb_param->debug) { int i; for (i=0; i < read_rc; i++) printf("<%.2X>", p_msg[i]); } if (msg_length < msg_length_computed) { /* Message incomplete */ length_to_read = msg_length_computed - msg_length; } else { switch (state) { case FUNCTION: /* Function code position */ length_to_read = compute_query_length_header( msg[TAB_HEADER_LENGTH[mb_param->type_com]]); msg_length_computed += length_to_read; /* It's useless to check the value of msg_length_computed in this case (only defined values are used). */ state = BYTE; break; case BYTE: length_to_read = compute_query_length_data(mb_param, msg); msg_length_computed += length_to_read; if (msg_length_computed > TAB_MAX_ADU_LENGTH[mb_param->type_com]) { errno = EMBBADDATA; error_print(mb_param, "too many data"); return -1; } state = COMPLETE; break; case COMPLETE: length_to_read = 0; break; } } /* Moves the pointer to receive other data */ p_msg = &(p_msg[read_rc]); if (length_to_read > 0) { /* If no character at the buffer wait TIME_OUT_END_OF_TRAME before to generate an error. */ tv.tv_sec = mb_param->timeout_end.tv_sec; tv.tv_usec = mb_param->timeout_end.tv_usec; WAIT_DATA(); } else { /* All chars are received */ s_rc = FALSE; } } if (mb_param->debug) printf("\n"); if (mb_param->type_com == RTU) { /* Returns msg_length on success and a negative value on failure */ return check_crc16(mb_param, msg, msg_length); } else { /* OK */ return msg_length; } } /* Listens for any query from a modbus master in TCP, requires the socket file descriptor etablished with the master device in argument or -1 to use the internal one of modbus_param_t. The modbus_slave_receive function shall return the request received and its byte length if successul. Otherwise, it shall return -1 and errno is set. */ int modbus_slave_receive(modbus_param_t *mb_param, int sockfd, uint8_t *query) { if (sockfd != -1) { mb_param->fd = sockfd; } /* The length of the query to receive isn't known. */ return receive_msg(mb_param, MSG_LENGTH_UNDEFINED, query); } /* Receives the response and checks values (and checksum in RTU). The function shall return the number of values (bits or words) and the response if successful. Otherwise, its shall return -1 and errno is set. Note: all functions used to send or receive data with modbus return these values. */ static int modbus_receive(modbus_param_t *mb_param, uint8_t *query, uint8_t *response) { int rc; int response_length_computed; int offset = TAB_HEADER_LENGTH[mb_param->type_com]; response_length_computed = compute_response_length(mb_param, query); rc = receive_msg(mb_param, response_length_computed, response); if (rc != -1) { /* GOOD RESPONSE */ int query_nb_value; int response_nb_value; /* The number of values is returned if it's corresponding * to the query */ switch (response[offset]) { case FC_READ_COIL_STATUS: case FC_READ_INPUT_STATUS: /* Read functions, 8 values in a byte (nb * of values in the query and byte count in * the response. */ query_nb_value = (query[offset + 3] << 8) + query[offset + 4]; query_nb_value = (query_nb_value / 8) + ((query_nb_value % 8) ? 1 : 0); response_nb_value = response[offset + 1]; break; case FC_READ_HOLDING_REGISTERS: case FC_READ_INPUT_REGISTERS: /* Read functions 1 value = 2 bytes */ query_nb_value = (query[offset + 3] << 8) + query[offset + 4]; response_nb_value = (response[offset + 1] / 2); break; case FC_FORCE_MULTIPLE_COILS: case FC_PRESET_MULTIPLE_REGISTERS: /* N Write functions */ query_nb_value = (query[offset + 3] << 8) + query[offset + 4]; response_nb_value = (response[offset + 3] << 8) | response[offset + 4]; break; case FC_REPORT_SLAVE_ID: /* Report slave ID (bytes received) */ query_nb_value = response_nb_value = rc; break; default: /* 1 Write functions & others */ query_nb_value = response_nb_value = 1; } if (query_nb_value == response_nb_value) { rc = response_nb_value; } else { if (mb_param->debug) { fprintf(stderr, "Quantity not corresponding to the query (%d != %d)\n", response_nb_value, query_nb_value); } errno = EMBBADDATA; rc = -1; } } else if (errno == EMBUNKEXC) { /* EXCEPTION CODE RECEIVED */ /* CRC must be checked here (not done in receive_msg) */ if (mb_param->type_com == RTU) { rc = check_crc16(mb_param, response, EXCEPTION_RESPONSE_LENGTH_RTU); if (rc == -1) return -1; } /* Check for exception response. 0x80 + function is stored in the exception response. */ if (0x80 + query[offset] == response[offset]) { int exception_code = response[offset + 1]; if (exception_code < MODBUS_EXCEPTION_MAX) { errno = MODBUS_ENOBASE + exception_code; } else { errno = EMBBADEXC; } error_print(mb_param, NULL); return -1; } } return rc; } static int response_io_status(int address, int nb, uint8_t *tab_io_status, uint8_t *response, int offset) { int shift = 0; int byte = 0; int i; for (i = address; i < address+nb; i++) { byte |= tab_io_status[i] << shift; if (shift == 7) { /* Byte is full */ response[offset++] = byte; byte = shift = 0; } else { shift++; } } if (shift != 0) response[offset++] = byte; return offset; } /* Build the exception response */ static int response_exception(modbus_param_t *mb_param, sft_t *sft, int exception_code, uint8_t *response) { int response_length; sft->function = sft->function + 0x80; response_length = build_response_basis(mb_param, sft, response); /* Positive exception code */ response[response_length++] = exception_code; return response_length; } /* Manages the received query. Analyses the query and constructs a response. If an error occurs, this function construct the response accordingly. */ int modbus_slave_manage(modbus_param_t *mb_param, const uint8_t *query, int query_length, modbus_mapping_t *mb_mapping) { int offset = TAB_HEADER_LENGTH[mb_param->type_com]; int slave = query[offset - 1]; int function = query[offset]; uint16_t address = (query[offset + 1] << 8) + query[offset + 2]; uint8_t response[MAX_MESSAGE_LENGTH]; int resp_length = 0; sft_t sft; /* Filter on the Modbus unit identifier (slave) in RTU mode */ if (mb_param->type_com == RTU && slave != mb_param->slave && slave != MODBUS_BROADCAST_ADDRESS) { /* Ignores the query (not for me) */ if (mb_param->debug) { printf("Request for slave %d ignored (not %d)\n", slave, mb_param->slave); } return 0; } sft.slave = slave; sft.function = function; if (mb_param->type_com == TCP) { sft.t_id = (query[0] << 8) + query[1]; } else { sft.t_id = 0; query_length -= CHECKSUM_LENGTH_RTU; } switch (function) { case FC_READ_COIL_STATUS: { int nb = (query[offset + 3] << 8) + query[offset + 4]; if ((address + nb) > mb_mapping->nb_coil_status) { if (mb_param->debug) { fprintf(stderr, "Illegal data address %0X in read_coil_status\n", address + nb); } resp_length = response_exception( mb_param, &sft, MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, response); } else { resp_length = build_response_basis(mb_param, &sft, response); response[resp_length++] = (nb / 8) + ((nb % 8) ? 1 : 0); resp_length = response_io_status(address, nb, mb_mapping->tab_coil_status, response, resp_length); } } break; case FC_READ_INPUT_STATUS: { /* Similar to coil status (but too much arguments to use a * function) */ int nb = (query[offset + 3] << 8) + query[offset + 4]; if ((address + nb) > mb_mapping->nb_input_status) { if (mb_param->debug) { fprintf(stderr, "Illegal data address %0X in read_input_status\n", address + nb); } resp_length = response_exception( mb_param, &sft, MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, response); } else { resp_length = build_response_basis(mb_param, &sft, response); response[resp_length++] = (nb / 8) + ((nb % 8) ? 1 : 0); resp_length = response_io_status(address, nb, mb_mapping->tab_input_status, response, resp_length); } } break; case FC_READ_HOLDING_REGISTERS: { int nb = (query[offset + 3] << 8) + query[offset + 4]; if ((address + nb) > mb_mapping->nb_holding_registers) { if (mb_param->debug) { fprintf(stderr, "Illegal data address %0X in read_holding_registers\n", address + nb); } resp_length = response_exception( mb_param, &sft, MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, response); } else { int i; resp_length = build_response_basis(mb_param, &sft, response); response[resp_length++] = nb << 1; for (i = address; i < address + nb; i++) { response[resp_length++] = mb_mapping->tab_holding_registers[i] >> 8; response[resp_length++] = mb_mapping->tab_holding_registers[i] & 0xFF; } } } break; case FC_READ_INPUT_REGISTERS: { /* Similar to holding registers (but too much arguments to use a * function) */ int nb = (query[offset + 3] << 8) + query[offset + 4]; if ((address + nb) > mb_mapping->nb_input_registers) { if (mb_param->debug) { fprintf(stderr, "Illegal data address %0X in read_input_registers\n", address + nb); } resp_length = response_exception( mb_param, &sft, MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, response); } else { int i; resp_length = build_response_basis(mb_param, &sft, response); response[resp_length++] = nb << 1; for (i = address; i < address + nb; i++) { response[resp_length++] = mb_mapping->tab_input_registers[i] >> 8; response[resp_length++] = mb_mapping->tab_input_registers[i] & 0xFF; } } } break; case FC_FORCE_SINGLE_COIL: if (address >= mb_mapping->nb_coil_status) { if (mb_param->debug) { fprintf(stderr, "Illegal data address %0X in force_singe_coil\n", address); } resp_length = response_exception( mb_param, &sft, MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, response); } else { int data = (query[offset + 3] << 8) + query[offset + 4]; if (data == 0xFF00 || data == 0x0) { mb_mapping->tab_coil_status[address] = (data) ? ON : OFF; /* In RTU mode, the CRC is computed and added to the query by modbus_send, the computed CRC will be same and optimisation is possible here (FIXME). */ memcpy(response, query, query_length); resp_length = query_length; } else { if (mb_param->debug) { fprintf(stderr, "Illegal data value %0X in force_single_coil request at address %0X\n", data, address); } resp_length = response_exception( mb_param, &sft, MODBUS_EXCEPTION_ILLEGAL_DATA_VALUE, response); } } break; case FC_PRESET_SINGLE_REGISTER: if (address >= mb_mapping->nb_holding_registers) { if (mb_param->debug) { fprintf(stderr, "Illegal data address %0X in preset_holding_register\n", address); } resp_length = response_exception( mb_param, &sft, MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, response); } else { int data = (query[offset + 3] << 8) + query[offset + 4]; mb_mapping->tab_holding_registers[address] = data; memcpy(response, query, query_length); resp_length = query_length; } break; case FC_FORCE_MULTIPLE_COILS: { int nb = (query[offset + 3] << 8) + query[offset + 4]; if ((address + nb) > mb_mapping->nb_coil_status) { if (mb_param->debug) { fprintf(stderr, "Illegal data address %0X in force_multiple_coils\n", address + nb); } resp_length = response_exception( mb_param, &sft, MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, response); } else { /* 6 = byte count */ set_bits_from_bytes(mb_mapping->tab_coil_status, address, nb, &query[offset + 6]); resp_length = build_response_basis(mb_param, &sft, response); /* 4 to copy the coil address (2) and the quantity of coils */ memcpy(response + resp_length, query + resp_length, 4); resp_length += 4; } } break; case FC_PRESET_MULTIPLE_REGISTERS: { int nb = (query[offset + 3] << 8) + query[offset + 4]; if ((address + nb) > mb_mapping->nb_holding_registers) { if (mb_param->debug) { fprintf(stderr, "Illegal data address %0X in preset_multiple_registers\n", address + nb); } resp_length = response_exception( mb_param, &sft, MODBUS_EXCEPTION_ILLEGAL_DATA_ADDRESS, response); } else { int i, j; for (i = address, j = 6; i < address + nb; i++, j += 2) { /* 6 and 7 = first value */ mb_mapping->tab_holding_registers[i] = (query[offset + j] << 8) + query[offset + j + 1]; } resp_length = build_response_basis(mb_param, &sft, response); /* 4 to copy the address (2) and the no. of registers */ memcpy(response + resp_length, query + resp_length, 4); resp_length += 4; } } break; case FC_READ_EXCEPTION_STATUS: case FC_REPORT_SLAVE_ID: if (mb_param->debug) { fprintf(stderr, "FIXME Not implemented\n"); } errno = ENOPROTOOPT; return -1; break; default: /* FIXME Invalid function exception */ break; } return modbus_send(mb_param, response, resp_length); } /* Reads IO status */ static int read_io_status(modbus_param_t *mb_param, int slave, int function, int start_addr, int nb, uint8_t *data_dest) { int rc; int query_length; uint8_t query[MIN_QUERY_LENGTH]; uint8_t response[MAX_MESSAGE_LENGTH]; query_length = build_query_basis(mb_param, slave, function, start_addr, nb, query); rc = modbus_send(mb_param, query, query_length); if (rc > 0) { int i, temp, bit; int pos = 0; int offset; int offset_end; rc = modbus_receive(mb_param, query, response); if (rc == -1) return -1; offset = TAB_HEADER_LENGTH[mb_param->type_com]; offset_end = offset + rc; for (i = offset; i < offset_end; i++) { /* Shift reg hi_byte to temp */ temp = response[i + 2]; for (bit = 0x01; (bit & 0xff) && (pos < nb);) { data_dest[pos++] = (temp & bit) ? TRUE : FALSE; bit = bit << 1; } } } return rc; } /* Reads the boolean status of coils and sets the array elements in the destination to TRUE or FALSE. */ int read_coil_status(modbus_param_t *mb_param, int slave, int start_addr, int nb, uint8_t *data_dest) { int rc; if (nb > MAX_STATUS) { if (mb_param->debug) { fprintf(stderr, "ERROR Too many coils status requested (%d > %d)\n", nb, MAX_STATUS); } errno = EMBMDATA; return -1; } rc = read_io_status(mb_param, slave, FC_READ_COIL_STATUS, start_addr, nb, data_dest); if (rc == -1) return -1; else return nb; } /* Same as read_coil_status but reads the slaves input table */ int read_input_status(modbus_param_t *mb_param, int slave, int start_addr, int nb, uint8_t *data_dest) { int rc; if (nb > MAX_STATUS) { if (mb_param->debug) { fprintf(stderr, "ERROR Too many input status requested (%d > %d)\n", nb, MAX_STATUS); } errno = EMBMDATA; return -1; } rc = read_io_status(mb_param, slave, FC_READ_INPUT_STATUS, start_addr, nb, data_dest); if (rc == -1) return -1; else return nb; } /* Reads the data from a modbus slave and put that data into an array */ static int read_registers(modbus_param_t *mb_param, int slave, int function, int start_addr, int nb, uint16_t *data_dest) { int rc; int query_length; uint8_t query[MIN_QUERY_LENGTH]; uint8_t response[MAX_MESSAGE_LENGTH]; if (nb > MAX_REGISTERS) { if (mb_param->debug) { fprintf(stderr, "ERROR Too many holding registers requested (%d > %d)\n", nb, MAX_REGISTERS); } errno = EMBMDATA; return -1; } query_length = build_query_basis(mb_param, slave, function, start_addr, nb, query); rc = modbus_send(mb_param, query, query_length); if (rc > 0) { int offset; int i; rc = modbus_receive(mb_param, query, response); offset = TAB_HEADER_LENGTH[mb_param->type_com]; /* If rc is negative, the loop is jumped ! */ for (i = 0; i < rc; i++) { /* shift reg hi_byte to temp OR with lo_byte */ data_dest[i] = (response[offset + 2 + (i << 1)] << 8) | response[offset + 3 + (i << 1)]; } } return rc; } /* Reads the holding registers in a slave and put the data into an array */ int read_holding_registers(modbus_param_t *mb_param, int slave, int start_addr, int nb, uint16_t *data_dest) { int status; if (nb > MAX_REGISTERS) { if (mb_param->debug) { fprintf(stderr, "ERROR Too many holding registers requested (%d > %d)\n", nb, MAX_REGISTERS); } errno = EMBMDATA; return -1; } status = read_registers(mb_param, slave, FC_READ_HOLDING_REGISTERS, start_addr, nb, data_dest); return status; } /* Reads the input registers in a slave and put the data into an array */ int read_input_registers(modbus_param_t *mb_param, int slave, int start_addr, int nb, uint16_t *data_dest) { int status; if (nb > MAX_REGISTERS) { fprintf(stderr, "ERROR Too many input registers requested (%d > %d)\n", nb, MAX_REGISTERS); errno = EMBMDATA; return -1; } status = read_registers(mb_param, slave, FC_READ_INPUT_REGISTERS, start_addr, nb, data_dest); return status; } /* Sends a value to a register in a slave. Used by force_single_coil and preset_single_register */ static int set_single(modbus_param_t *mb_param, int slave, int function, int addr, int value) { int rc; int query_length; uint8_t query[MIN_QUERY_LENGTH]; query_length = build_query_basis(mb_param, slave, function, addr, value, query); rc = modbus_send(mb_param, query, query_length); if (rc > 0) { /* Used by force_single_coil and * preset_single_register */ uint8_t response[MIN_QUERY_LENGTH]; rc = modbus_receive(mb_param, query, response); } return rc; } /* Turns ON or OFF a single coil in the slave device */ int force_single_coil(modbus_param_t *mb_param, int slave, int coil_addr, int state) { int status; if (state) state = 0xFF00; status = set_single(mb_param, slave, FC_FORCE_SINGLE_COIL, coil_addr, state); return status; } /* Sets a value in one holding register in the slave device */ int preset_single_register(modbus_param_t *mb_param, int slave, int reg_addr, int value) { int status; status = set_single(mb_param, slave, FC_PRESET_SINGLE_REGISTER, reg_addr, value); return status; } /* Sets/resets the coils in the slave from an array in argument */ int force_multiple_coils(modbus_param_t *mb_param, int slave, int start_addr, int nb, const uint8_t *data_src) { int rc; int i; int byte_count; int query_length; int coil_check = 0; int pos = 0; uint8_t query[MAX_MESSAGE_LENGTH]; if (nb > MAX_STATUS) { if (mb_param->debug) { fprintf(stderr, "ERROR Writing to too many coils (%d > %d)\n", nb, MAX_STATUS); } errno = EMBMDATA; return -1; } query_length = build_query_basis(mb_param, slave, FC_FORCE_MULTIPLE_COILS, start_addr, nb, query); byte_count = (nb / 8) + ((nb % 8) ? 1 : 0); query[query_length++] = byte_count; for (i = 0; i < byte_count; i++) { int bit; bit = 0x01; query[query_length] = 0; while ((bit & 0xFF) && (coil_check++ < nb)) { if (data_src[pos++]) query[query_length] |= bit; else query[query_length] &=~ bit; bit = bit << 1; } query_length++; } rc = modbus_send(mb_param, query, query_length); if (rc > 0) { uint8_t response[MAX_MESSAGE_LENGTH]; rc = modbus_receive(mb_param, query, response); } return rc; } /* Copies the values in the slave from the array given in argument */ int preset_multiple_registers(modbus_param_t *mb_param, int slave, int start_addr, int nb, const uint16_t *data_src) { int rc; int i; int query_length; int byte_count; uint8_t query[MAX_MESSAGE_LENGTH]; if (nb > MAX_REGISTERS) { if (mb_param->debug) { fprintf(stderr, "ERROR Trying to write to too many registers (%d > %d)\n", nb, MAX_REGISTERS); } errno = EMBMDATA; return -1; } query_length = build_query_basis(mb_param, slave, FC_PRESET_MULTIPLE_REGISTERS, start_addr, nb, query); byte_count = nb * 2; query[query_length++] = byte_count; for (i = 0; i < nb; i++) { query[query_length++] = data_src[i] >> 8; query[query_length++] = data_src[i] & 0x00FF; } rc = modbus_send(mb_param, query, query_length); if (rc > 0) { uint8_t response[MAX_MESSAGE_LENGTH]; rc = modbus_receive(mb_param, query, response); } return rc; } /* Request the slave ID */ int report_slave_id(modbus_param_t *mb_param, int slave, uint8_t *data_dest) { int rc; int query_length; uint8_t query[MIN_QUERY_LENGTH]; query_length = build_query_basis(mb_param, slave, FC_REPORT_SLAVE_ID, 0, 0, query); /* HACKISH, start_addr and count are not used */ query_length -= 4; rc = modbus_send(mb_param, query, query_length); if (rc > 0) { int i; int offset; int offset_end; uint8_t response[MAX_MESSAGE_LENGTH]; /* Byte count, slave id, run indicator status, additional data */ rc = modbus_receive(mb_param, query, response); if (rc == -1) return rc; offset = TAB_HEADER_LENGTH[mb_param->type_com] - 1; offset_end = offset + rc; for (i = offset; i < offset_end; i++) data_dest[i] = response[i]; } return rc; } void init_common(modbus_param_t *mb_param) { mb_param->timeout_begin.tv_sec = 0; mb_param->timeout_begin.tv_usec = TIME_OUT_BEGIN_OF_TRAME; mb_param->timeout_end.tv_sec = 0; mb_param->timeout_end.tv_usec = TIME_OUT_END_OF_TRAME; } /* Initializes the modbus_param_t structure for RTU - device: "/dev/ttyS0" - baud: 9600, 19200, 57600, 115200, etc - parity: 'N' stands for None, 'E' for Even and 'O' for odd - data_bits: 5, 6, 7, 8 - stop_bits: 1, 2 - slave: slave number */ int modbus_init_rtu(modbus_param_t *mb_param, const char *device, int baud, char parity, int data_bit, int stop_bit, int slave) { memset(mb_param, 0, sizeof(modbus_param_t)); init_common(mb_param); strcpy(mb_param->device, device); mb_param->baud = baud; if (parity == 'N' || parity == 'E' || parity == 'O') { mb_param->parity = parity; } else { errno = EINVAL; return -1; } mb_param->debug = FALSE; mb_param->data_bit = data_bit; mb_param->stop_bit = stop_bit; mb_param->type_com = RTU; mb_param->error_recovery = FALSE; return modbus_set_slave(mb_param, slave); } /* Initializes the modbus_param_t structure for TCP. - ip : "192.168.0.5" - port : 1099 Set the port to MODBUS_TCP_DEFAULT_PORT to use the default one (502). It's convenient to use a port number greater than or equal to 1024 because it's not necessary to be root to use this port number. */ int modbus_init_tcp(modbus_param_t *mb_param, const char *ip, int port) { memset(mb_param, 0, sizeof(modbus_param_t)); init_common(mb_param); strncpy(mb_param->ip, ip, sizeof(char)*16); mb_param->port = port; mb_param->type_com = TCP; mb_param->error_recovery = FALSE; /* Can be changed after to reach remote serial Modbus device */ mb_param->slave = 0xFF; return 0; } /* Define the slave number, the special value MODBUS_TCP_SLAVE (0xFF) can be * used in TCP mode to restore the default value. */ int modbus_set_slave(modbus_param_t *mb_param, int slave) { if (slave >= 1 && slave <= 247) { mb_param->slave = slave; } else if (mb_param->type_com == TCP && slave == MODBUS_TCP_SLAVE) { mb_param->slave = slave; } else { errno = EINVAL; return -1; } return 0; } /* When disabled (default), it is expected that the application will check for error returns and deal with them as necessary. It's not recommanded to enable error recovery for slave/server. When enabled, the library will attempt an immediate reconnection which may hang for several seconds if the network to the remote target unit is down. The write will try a infinite close/connect loop until to be successful and the select/read calls will just try to retablish the connection one time then will return an error (if the connecton was down, the values to read are certainly not available anymore after reconnection, except for slave/server). */ int modbus_set_error_recovery(modbus_param_t *mb_param, int enabled) { if (enabled == TRUE || enabled == FALSE) { mb_param->error_recovery = (uint8_t) enabled; } else { errno = EINVAL; return -1; } return 0; } /* Get the timeout of begin of trame */ void modbus_get_timeout_begin(modbus_param_t *mb_param, struct timeval *timeout) { *timeout = mb_param->timeout_begin; } /* Set timeout when waiting the beginning of a trame */ void modbus_set_timeout_begin(modbus_param_t *mb_param, const struct timeval *timeout) { mb_param->timeout_begin = *timeout; } /* Get the timeout of end of trame */ void modbus_get_timeout_end(modbus_param_t *mb_param, struct timeval *timeout) { *timeout = mb_param->timeout_end; } /* Set timeout when waiting the end of a trame */ void modbus_set_timeout_end(modbus_param_t *mb_param, const struct timeval *timeout) { mb_param->timeout_end = *timeout; } /* Sets up a serial port for RTU communications */ static int modbus_connect_rtu(modbus_param_t *mb_param) { struct termios tios; speed_t speed; if (mb_param->debug) { printf("Opening %s at %d bauds (%c, %d, %d)\n", mb_param->device, mb_param->baud, mb_param->parity, mb_param->data_bit, mb_param->stop_bit); } /* The O_NOCTTY flag tells UNIX that this program doesn't want to be the "controlling terminal" for that port. If you don't specify this then any input (such as keyboard abort signals and so forth) will affect your process Timeouts are ignored in canonical input mode or when the NDELAY option is set on the file via open or fcntl */ mb_param->fd = open(mb_param->device, O_RDWR | O_NOCTTY | O_NDELAY | O_EXCL); if (mb_param->fd == -1) { fprintf(stderr, "ERROR Can't open the device %s (%s)\n", mb_param->device, strerror(errno)); return -1; } /* Save */ tcgetattr(mb_param->fd, &(mb_param->old_tios)); memset(&tios, 0, sizeof(struct termios)); /* C_ISPEED Input baud (new interface) C_OSPEED Output baud (new interface) */ switch (mb_param->baud) { case 110: speed = B110; break; case 300: speed = B300; break; case 600: speed = B600; break; case 1200: speed = B1200; break; case 2400: speed = B2400; break; case 4800: speed = B4800; break; case 9600: speed = B9600; break; case 19200: speed = B19200; break; case 38400: speed = B38400; break; case 57600: speed = B57600; break; case 115200: speed = B115200; break; default: speed = B9600; if (mb_param->debug) { fprintf(stderr, "WARNING Unknown baud rate %d for %s (B9600 used)\n", mb_param->baud, mb_param->device); } } /* Set the baud rate */ if ((cfsetispeed(&tios, speed) < 0) || (cfsetospeed(&tios, speed) < 0)) { return -1; } /* C_CFLAG Control options CLOCAL Local line - do not change "owner" of port CREAD Enable receiver */ tios.c_cflag |= (CREAD | CLOCAL); /* CSIZE, HUPCL, CRTSCTS (hardware flow control) */ /* Set data bits (5, 6, 7, 8 bits) CSIZE Bit mask for data bits */ tios.c_cflag &= ~CSIZE; switch (mb_param->data_bit) { case 5: tios.c_cflag |= CS5; break; case 6: tios.c_cflag |= CS6; break; case 7: tios.c_cflag |= CS7; break; case 8: default: tios.c_cflag |= CS8; break; } /* Stop bit (1 or 2) */ if (mb_param->stop_bit == 1) tios.c_cflag &=~ CSTOPB; else /* 2 */ tios.c_cflag |= CSTOPB; /* PARENB Enable parity bit PARODD Use odd parity instead of even */ if (mb_param->parity == 'N') { /* None */ tios.c_cflag &=~ PARENB; } else if (mb_param->parity == 'E') { /* Even */ tios.c_cflag |= PARENB; tios.c_cflag &=~ PARODD; } else { /* Odd */ tios.c_cflag |= PARENB; tios.c_cflag |= PARODD; } /* Read the man page of termios if you need more information. */ /* This field isn't used on POSIX systems tios.c_line = 0; */ /* C_LFLAG Line options ISIG Enable SIGINTR, SIGSUSP, SIGDSUSP, and SIGQUIT signals ICANON Enable canonical input (else raw) XCASE Map uppercase \lowercase (obsolete) ECHO Enable echoing of input characters ECHOE Echo erase character as BS-SP-BS ECHOK Echo NL after kill character ECHONL Echo NL NOFLSH Disable flushing of input buffers after interrupt or quit characters IEXTEN Enable extended functions ECHOCTL Echo control characters as ^char and delete as ~? ECHOPRT Echo erased character as character erased ECHOKE BS-SP-BS entire line on line kill FLUSHO Output being flushed PENDIN Retype pending input at next read or input char TOSTOP Send SIGTTOU for background output Canonical input is line-oriented. Input characters are put into a buffer which can be edited interactively by the user until a CR (carriage return) or LF (line feed) character is received. Raw input is unprocessed. Input characters are passed through exactly as they are received, when they are received. Generally you'll deselect the ICANON, ECHO, ECHOE, and ISIG options when using raw input */ /* Raw input */ tios.c_lflag &= ~(ICANON | ECHO | ECHOE | ISIG); /* C_IFLAG Input options Constant Description INPCK Enable parity check IGNPAR Ignore parity errors PARMRK Mark parity errors ISTRIP Strip parity bits IXON Enable software flow control (outgoing) IXOFF Enable software flow control (incoming) IXANY Allow any character to start flow again IGNBRK Ignore break condition BRKINT Send a SIGINT when a break condition is detected INLCR Map NL to CR IGNCR Ignore CR ICRNL Map CR to NL IUCLC Map uppercase to lowercase IMAXBEL Echo BEL on input line too long */ if (mb_param->parity == 'N') { /* None */ tios.c_iflag &= ~INPCK; } else { tios.c_iflag |= INPCK; } /* Software flow control is disabled */ tios.c_iflag &= ~(IXON | IXOFF | IXANY); /* C_OFLAG Output options OPOST Postprocess output (not set = raw output) ONLCR Map NL to CR-NL ONCLR ant others needs OPOST to be enabled */ /* Raw ouput */ tios.c_oflag &=~ OPOST; /* C_CC Control characters VMIN Minimum number of characters to read VTIME Time to wait for data (tenths of seconds) UNIX serial interface drivers provide the ability to specify character and packet timeouts. Two elements of the c_cc array are used for timeouts: VMIN and VTIME. Timeouts are ignored in canonical input mode or when the NDELAY option is set on the file via open or fcntl. VMIN specifies the minimum number of characters to read. If it is set to 0, then the VTIME value specifies the time to wait for every character read. Note that this does not mean that a read call for N bytes will wait for N characters to come in. Rather, the timeout will apply to the first character and the read call will return the number of characters immediately available (up to the number you request). If VMIN is non-zero, VTIME specifies the time to wait for the first character read. If a character is read within the time given, any read will block (wait) until all VMIN characters are read. That is, once the first character is read, the serial interface driver expects to receive an entire packet of characters (VMIN bytes total). If no character is read within the time allowed, then the call to read returns 0. This method allows you to tell the serial driver you need exactly N bytes and any read call will return 0 or N bytes. However, the timeout only applies to the first character read, so if for some reason the driver misses one character inside the N byte packet then the read call could block forever waiting for additional input characters. VTIME specifies the amount of time to wait for incoming characters in tenths of seconds. If VTIME is set to 0 (the default), reads will block (wait) indefinitely unless the NDELAY option is set on the port with open or fcntl. */ /* Unused because we use open with the NDELAY option */ tios.c_cc[VMIN] = 0; tios.c_cc[VTIME] = 0; if (tcsetattr(mb_param->fd, TCSANOW, &tios) < 0) { return -1; } return 0; } /* Establishes a modbus TCP connection with a modbus slave */ static int modbus_connect_tcp(modbus_param_t *mb_param) { int rc; int option; struct sockaddr_in addr; mb_param->fd = socket(PF_INET, SOCK_STREAM, 0); if (mb_param->fd == -1) { return -1; } /* Set the TCP no delay flag */ /* SOL_TCP = IPPROTO_TCP */ option = 1; rc = setsockopt(mb_param->fd, IPPROTO_TCP, TCP_NODELAY, (const void *)&option, sizeof(int)); if (rc == -1) { close(mb_param->fd); return -1; } #if (!HAVE_DECL___CYGWIN__) /** * Cygwin defines IPTOS_LOWDELAY but can't handle that flag so it's * necessary to workaround that problem. **/ /* Set the IP low delay option */ option = IPTOS_LOWDELAY; rc = setsockopt(mb_param->fd, IPPROTO_IP, IP_TOS, (const void *)&option, sizeof(int)); if (rc == -1) { close(mb_param->fd); return -1; } #endif if (mb_param->debug) { printf("Connecting to %s\n", mb_param->ip); } addr.sin_family = AF_INET; addr.sin_port = htons(mb_param->port); addr.sin_addr.s_addr = inet_addr(mb_param->ip); rc = connect(mb_param->fd, (struct sockaddr *)&addr, sizeof(struct sockaddr_in)); if (rc == -1) { close(mb_param->fd); return -1; } return 0; } /* Establishes a modbus connexion. Returns 0 on success or -1 on failure. */ int modbus_connect(modbus_param_t *mb_param) { int rc; if (mb_param->type_com == RTU) rc = modbus_connect_rtu(mb_param); else rc = modbus_connect_tcp(mb_param); return rc; } /* Closes the file descriptor in RTU mode */ static void modbus_close_rtu(modbus_param_t *mb_param) { tcsetattr(mb_param->fd, TCSANOW, &(mb_param->old_tios)); close(mb_param->fd); } /* Closes the network connection and socket in TCP mode */ static void modbus_close_tcp(modbus_param_t *mb_param) { shutdown(mb_param->fd, SHUT_RDWR); close(mb_param->fd); } /* Closes a modbus connection */ void modbus_close(modbus_param_t *mb_param) { if (mb_param->type_com == RTU) modbus_close_rtu(mb_param); else modbus_close_tcp(mb_param); } /* Activates the debug messages */ void modbus_set_debug(modbus_param_t *mb_param, int boolean) { mb_param->debug = boolean; } /* Allocates 4 arrays to store coils, input status, input registers and holding registers. The pointers are stored in modbus_mapping structure. The modbus_mapping_new() function shall return 0 if successful. Otherwise it shall return -1 and set errno to ENOMEM. */ int modbus_mapping_new(modbus_mapping_t *mb_mapping, int nb_coil_status, int nb_input_status, int nb_holding_registers, int nb_input_registers) { /* 0X */ mb_mapping->nb_coil_status = nb_coil_status; mb_mapping->tab_coil_status = (uint8_t *) malloc(nb_coil_status * sizeof(uint8_t)); if (mb_mapping->tab_coil_status == NULL) { errno = ENOMEM; return -1; } memset(mb_mapping->tab_coil_status, 0, nb_coil_status * sizeof(uint8_t)); /* 1X */ mb_mapping->nb_input_status = nb_input_status; mb_mapping->tab_input_status = (uint8_t *) malloc(nb_input_status * sizeof(uint8_t)); if (mb_mapping->tab_input_status == NULL) { free(mb_mapping->tab_coil_status); errno = ENOMEM; return -1; } memset(mb_mapping->tab_input_status, 0, nb_input_status * sizeof(uint8_t)); /* 4X */ mb_mapping->nb_holding_registers = nb_holding_registers; mb_mapping->tab_holding_registers = (uint16_t *) malloc(nb_holding_registers * sizeof(uint16_t)); if (mb_mapping->tab_holding_registers == NULL) { free(mb_mapping->tab_coil_status); free(mb_mapping->tab_input_status); errno = ENOMEM; return -1; } memset(mb_mapping->tab_holding_registers, 0, nb_holding_registers * sizeof(uint16_t)); /* 3X */ mb_mapping->nb_input_registers = nb_input_registers; mb_mapping->tab_input_registers = (uint16_t *) malloc(nb_input_registers * sizeof(uint16_t)); if (mb_mapping->tab_input_registers == NULL) { free(mb_mapping->tab_coil_status); free(mb_mapping->tab_input_status); free(mb_mapping->tab_holding_registers); errno = ENOMEM; return -1; } memset(mb_mapping->tab_input_registers, 0, nb_input_registers * sizeof(uint16_t)); return 0; } /* Frees the 4 arrays */ void modbus_mapping_free(modbus_mapping_t *mb_mapping) { free(mb_mapping->tab_coil_status); free(mb_mapping->tab_input_status); free(mb_mapping->tab_holding_registers); free(mb_mapping->tab_input_registers); } /* Listens for any query from one or many modbus masters in TCP */ int modbus_slave_listen_tcp(modbus_param_t *mb_param, int nb_connection) { int new_socket; int yes; struct sockaddr_in addr; new_socket = socket(PF_INET, SOCK_STREAM, IPPROTO_TCP); if (new_socket == -1) { return -1; } yes = 1; if (setsockopt(new_socket, SOL_SOCKET, SO_REUSEADDR, (char *) &yes, sizeof(yes)) == -1) { close(new_socket); return -1; } memset(&addr, 0, sizeof(addr)); addr.sin_family = AF_INET; /* If the modbus port is < to 1024, we need the setuid root. */ addr.sin_port = htons(mb_param->port); addr.sin_addr.s_addr = INADDR_ANY; if (bind(new_socket, (struct sockaddr *)&addr, sizeof(addr)) == -1) { close(new_socket); return -1; } if (listen(new_socket, nb_connection) == -1) { close(new_socket); return -1; } return new_socket; } /* On success, the function return a non-negative integer that is a descriptor for the accepted socket. On error, -1 is returned, and errno is set appropriately. */ int modbus_slave_accept_tcp(modbus_param_t *mb_param, int *socket) { struct sockaddr_in addr; socklen_t addrlen; addrlen = sizeof(struct sockaddr_in); mb_param->fd = accept(*socket, (struct sockaddr *)&addr, &addrlen); if (mb_param->fd == -1) { close(*socket); *socket = 0; return -1; } if (mb_param->debug) { printf("The client %s is connected\n", inet_ntoa(addr.sin_addr)); } return mb_param->fd; } /* Closes a TCP socket */ void modbus_slave_close_tcp(int socket) { shutdown(socket, SHUT_RDWR); close(socket); } /** Utils **/ /* Sets many input/coil status from a single byte value (all 8 bits of the byte value are set) */ void set_bits_from_byte(uint8_t *dest, int address, const uint8_t value) { int i; for (i=0; i<8; i++) { dest[address+i] = (value & (1 << i)) ? ON : OFF; } } /* Sets many input/coil status from a table of bytes (only the bits between address and address + nb_bits are set) */ void set_bits_from_bytes(uint8_t *dest, int address, unsigned int nb_bits, const uint8_t tab_byte[]) { int i; int shift = 0; for (i = address; i < address + nb_bits; i++) { dest[i] = tab_byte[(i - address) / 8] & (1 << shift) ? ON : OFF; /* gcc doesn't like: shift = (++shift) % 8; */ shift++; shift %= 8; } } /* Gets the byte value from many input/coil status. To obtain a full byte, set nb_bits to 8. */ uint8_t get_byte_from_bits(const uint8_t *src, int address, unsigned int nb_bits) { int i; uint8_t value = 0; if (nb_bits > 8) { assert(nb_bits < 8); nb_bits = 8; } for (i=0; i < nb_bits; i++) { value |= (src[address+i] << i); } return value; } /* Read a float from 4 bytes in Modbus format */ float modbus_read_float(const uint16_t *src) { float r = 0.0f; uint32_t i; i = (((uint32_t)src[1]) << 16) + src[0]; memcpy(&r, &i, sizeof (r)); return r; } /* Write a float to 4 bytes in Modbus format */ void modbus_write_float(float real, uint16_t *dest) { uint32_t i = 0; memcpy(&i, &real, sizeof (i)); dest[0] = (uint16_t)i; dest[1] = (uint16_t)(i >> 16); }